Royal Sovereign RSH-380 Owner's Manual download pdf (Page 7)

1312

RSH-380

Rollers do not operate

after the RUN/STOP

button is pressed

Roller is not heating

Result of lamination is

waved.

Result of lamination is

not clear

Symptom Possible Cause Possible Solution

1.Safety cover is opened.

2. Power cord is not

plugged in

Call your authorized

dealer

1. Film tension is

unbalanced.

2. lower idler bar is not

located in proper

position

1. Temperature is lower or

speed is higher than

recommended

1. Check to make sure the

safety cover is closed.

2. Check the power cord.

Call your authorized dealer

1. Adjust film tension by

rotating tension handle

2. Push idler bar up

1. Adjust speed and

temperature

10. MAINTENANCE

12. SPECIFICATIONS

11. TROUBLE SHOOTING GUIDE

1. Do not apply any cleaning fluids to the rollers, certain fluids may cause damage.

2. Do not clean rollers with sharp objects, use a rubber gum eraser to clean resin off

of the rollers.

3. Use a damp cloth with only water to clean the body of the machine.

4.Store machine in a dry clean area.

Description RSH-380

Power supply AC 100, 200, 220 240V 50/60Hz 120V 60Hz

Power consumption 1500W

Max laminating width 380mm / 15"

Film thickness 25~250 mic / 1~10mil

Max laminating speed 5m/min / 16.4ft/min

Ready time 8min

Heating method Hot roller

Driving motor DC geared

Max temperature contro

l 150

C / 302

Speed control 9 settings

Transport type 4 Roller

Film core size 1", 2.25", 3"

Cross cutter Yes

Hot lamination Yes

Mounting thickness 6mm / 0.24"

Reverse Yes

Unit dimensions (w d h) 550 690 605(mm) / 21.5" 27" 24"

Unit weight 45kg / 99 Ibs

Carton dimensions (w d h) 800 750 650(mm) / 31.5" 29.5" 25,5"

Carton weight 57kg / 126 Ibs

1 2 3 4 5 6 7

Comments to this Manuals

No comments

Royal Sovereign RSH-380 Owner's Manual Page 7

Comments to this Manuals

Related products and manuals for Laminators Royal Sovereign RSH-380