Royal Sovereign RSH-380SL Owner's Manual download pdf (Page 13)

12

12. TROUBLESHOOTING

Symptom

Cause

Possible Solution

Machine will

not turn on:

a. Power switch is in "0" (Off)

position

b. Tripped circuit breaker.

c. Blown main power fuse.

a. Put the power switch to the

"I" (On) position

b. Reset the circuit breaker.

c. Replace the fuse.

There is power, but the

rollers are not turning after the

"RUN" button is

pressed:

a. Safety cover is not closed.

b. Blown motor fuse.

a. Close the safety cover to

active the safety switch.

b.

Replace the motor fuse.

The unit is not heating up

Call your authorized

dealer

Call your authorized dealer

Curled lamination:

a. Upward curl.

b. Downward curl.

a. Loosen the top roll film tension.

b. Loosen the bottom roll

film tension.

c. Please put the lamination

pass through the DE-CURLING

bar for Single laminating

Unclear lamination:

The main roller temperatures are too

low and/or lamination speed is too fast.

Raise the roller

temperatures and/or

lower the lamination speed.

1 2 ... 8 9 10 11 12 13 14 15 16

Comments to this Manuals

No comments