Royal Sovereign NB-1900N Owner's Manual download pdf (Page 12)

1. Be sure that neckties, necklaces, long hair and loose clothing are

kept away while the laminator is in operation.

2. Prevent children from accessing the machine.

3. Place the machine on a sturdy, flat work surface to prevent damage.

4. Make certain that the machine is connected to an adequate power source.

5. Do not use for any other purpose, other than laminating.

NB-1900N

IMPORTANT SAFETY CONCERNS

1. Width of upper and lower side of film should be same in order not to

allow melted adhesive to stick to the roller.

2. Routine roller cleaning is required to prevent adhesive build-up.

3. Always keep the machine clean.

To remove dust, finger prints, etc. on housing, use diluted alcohol on

lint-free cloth. Prevent any liquids from getting into the laminator.

(Do not use strong alcohol or petroleum-based cleaning solvents

or abrasives.)

MAINTENANCE

Owner's manual : 1EA

ASSEMBLY PARTS

TROUBLESHOOTING

*Motor doesn't work. 1.Power cord may not be 1.Check the power cord.

plugged in

2.Power switch in

2.Check that switch is on

OFF mod

*Film is not laminated. 1.Cold mode is set. 1.Change the setting to

hot laminatio

*Lamination 1.Setting is too low. 1.Increase setting.

is not clear.

Cause

Check point

Symptom

1 2 ... 7 8 9 10 11 12 13 14

No comments

Royal Sovereign NB-1900N Owner's Manual Page 12