10
Cleaning the Housing
Use a soft, damp cloth to wipe the body clean.
Never use chemicals, gasoline, detergents, chemically treated cloths, or other cleansing solutions as this could possibly
damage the housing.
Storage
• Drain any water from the unit by emptying the water through the drain port into the water tray (see the PARTS section).
• Clean the filter
• Unplug and wrap the power cord around the cord holders on the back of the unit.
• If possible, place back in its original carton or cover for storage.
• Always keep the unit in the upright position
TROUBLESHOOTING
NOTE: Never try to repair or dismantle the unit yourself.
Problem Possible Cause/Solution
• Press reset button on the plug until the green LED light
on the plug illuminates.
• Check to see if it is plugged in.
• Check to see if the power is on.
• Is there direct sunlight? Close all curtains and blinds.
• Check to make sure there are no doors/windows open.
• Check to make sure nothing that produces heat is on.
• The unit may be on an uneven surface. Make sure it is
on a flat surface.
• The compressor may have turned on. This is normal.
The air conditioner does not run
The machine is not cooling very well
The unit is vibrating
Sudden noise
Comments to this Manuals